Tips for maintenance of linear guide: Remove the pulley of the linear guide, remember to loosen the screw, if it is dropped or lost, it will be very troublesome, then remove the bearing. The cores of some wheels are tight and the bearings are difficult to remove. You can use a hexagonal wrench to dig down. Don't worry, the bearings are not easy to break, but don't be too violent. Then use a toothbrush to brush off the dirt on the bearing surface. Some bearings have detachable side covers, while others cannot. It is recommended to determine whether you are supporting the detachable side covers. How to judge: If there is a C-ring on the edge of the bearing side cover, the ring is detachable, if not, it is not detachable, but there are exceptions. If it is detachable, it is very simple! Use a flat-shaped precision screwdriver to pry up the C-ring in the C-ring gap, and then remove the side cover, just remove one side. The C-ring and side cover should be stowed away, and you may have to put them back after cleaning. If it can't be disassembled, it's more troublesome. Use a destructive method. Use a precision screwdriver to reach into the seam of the side cover and pry up the side cover. The side cover can be cleaned. Pour an appropriate amount of decontamination oil into the bowl, and put the bearing of the linear guide for a while, so that the linear guide can be cleaned. The above is the related content of linear guides compiled by linear guide manufacturers, I hope to help everyone!
Свържете се с нас
E-mail: sales@gyballscrew.com Tel(WhatsApp): 17769816967
seller@gyballscrew.com 17769815516
saleChen@gyballscrew.com 15325179771